- Product description
The SRG Low Pressure Regulator 591 Jumbo enables an 8 mm gas hose to be connected to gas cylinders with a clip-on Withdrawal valve. The pressure regulator regulates the gas pressure so that the desired appliances can be connected.
Inlet: Clip-on (quick coupling) type G.56 - diameter 35mm according to EN26303
Outlet: Hose connection for 10mm
Inlet pressure: 16 bar
Outlet pressure: 30 mbar
Flow rate per hour: 2 kg/h
Advantages:
- Two-stage design ensures extremely stable flow rate
- No tools required to connect the regulator to the valve
- Seals itself after connection and prevents access to the control mechanism
The SRG Jumbo system was invented and patented by Willy Rackow in 1934.
Safety instructions and warnings
Safety instructions for SRG gas regulator (clip-on) 591 Jumbo 30mbar G.56 -> 10mm hose
1. the gas regulator may only be installed by qualified technicians.
2. before installation, always ensure that the gas regulator is used with the correct specifications and for the intended purpose.
3. before installation, check that the gas regulator and all parts are free from damage.
4. ensure that all connections are properly tightened and secured to prevent gas leaks.
5. make sure that the gas regulator is properly fixed and stable to avoid shocks and vibrations.
6. the gas regulator must not be installed near heat sources or flammable materials.
7. use only tested and approved hoses and connections.
8. ensure that the gas regulator is always well ventilated and that there are no obstacles in the vicinity that could restrict air circulation.
9. do not clean the gas regulator, only wipe it with a soft cloth.
10. if you notice a smell of gas, switch off the gas immediately and open the windows to ventilate the building. Contact a qualified technician to rectify the problem.
Manufacturer contact information
Contact manufacturer
ROTAREX SRG
Industriestrasse 11
35075 Gladenbach
Germany
Email: srg@rotarex.com