- Product description
- Accessories
Technical data IG7 Dakota Rail Working pressure from 0.5 to 2.0 bar Maximum pressure 4.5 bar Operating voltage 10,8 - 14,4 V Inlet connection ø12 mm Connections at the outlet Pre-drilled nozzles M8x1 Temperature range -20° / + 120° C Resistance 2.0 Ohm Minimum injection time 1.8 ms Open 1.70 ms* Close 1.40 ms* Homologations E8 67R-01 4893 / 110R-00 4894
Safety instructions and warnings
Safety instructions for RAIL injector LPG CNG IG7 Dakota 4 cylinder 2.0 Ohm (successor IG3 Horizon)
1. follow the manufacturer's operating instructions for the correct installation and use of the RAIL injector.
2. ensure that the product is properly connected to the appropriate pressure regulator and components for LPG/CNG systems.
3. regularly check the condition of the lines and hoses of the injector and replace them immediately if they are damaged.
4. keep the injector away from heat sources and naked flames.
5 Only use gas types and pressures recommended or authorised by the manufacturer.
6 Ensure that the electrical connections of the injector are wired correctly and securely.
7 In the event of problems or faults with the injector, contact an authorised specialist or the manufacturer.
8. observe all applicable national and regional rules and regulations for the operation of LPG/CNG systems.
9. disconnect the power supply and the gas before carrying out maintenance work or repairs on the injector.
10. always keep the manufacturer's operating instructions and safety instructions to hand and pass them on when reselling the product.
Manufacturer contact information
Rail S.r.l.
Via A. Grandi, 16
42030 Vezzano Sul Crostolo (RE)
Italy
+39 0522 603 801
info@railgroup.it
