- Product description
Quality hose for use in all types of vehicles. Well suited for the integration of the LPG reducer/pressure reducer in the cooling water circuit.
Permissible temperature range
-40°C to 120°C
Recommendation
We recommend using NORMA worm drive clamps 12-18mm / 7mm for sealing.
Delivery
The hoses are stored in 25m rolls and are also supplied in one piece up to this length!
Technical Data
Inner diameter: 8mm
Outer diameter: 15mm
Wall thickness: 3.5mm
Temperature range: -40° to +100°C
Safety instructions and warnings
Safety instructions for FARO cooling water hose 8x15mm (sold by the metre)
1. the FARO cooling water hose must not be used for purposes other than the cooling water line.
2. the operating pressure must not be higher than the maximum working pressure specified on the product packaging.
3. the FARO cooling water hose must not be left under permanent load and should be stored properly after use.
4. use suitable tools to assemble and disassemble the hose and ensure that the hose is not twisted or damaged.
5 Ensure that the hose is properly attached to the appliance and that there are no leaks before putting the appliance into operation.
6. avoid exposing the FARO cooling water hose to sharp objects or placing it over sharp edges.
7. the FARO cooling water hose must not be exposed to excessive heat or cold and should be protected from direct sunlight.
8. read all instructions and safety information carefully before using the FARO coolant hose to ensure safe and effective operation.
Manufacturer Contact information
Manufacturer Contact
OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it