- Product description
BRISK Silver LPG/ CNG RR15YS-1
Width across flats: 16 mm
External thread: 25 mm
Thread diameter: M 14 x 1.25 mm
Electrode gap: 1.0 mm
Torque: 10-20 Nm
Replacement interval: max. 30,000 km
Brisk code: 1723
The BRISK Silver Line has been specially designed for the requirements of LPG/CNG fuelled vehicles. The silver centre electrode has a smaller diameter than conventional spark plugs and significantly reduces the voltage requirement due to its small electrode gap.
BRISK Silver spark plugs can be used in both petrol and gas-powered vehicles.
You can find the current BRISK catalogue and a selection guide in our download area by clicking here.
Safety instructions and warnings
Safety instructions for BRISK SILVER LPG RR15YS-1 spark plug:
- Before installing the spark plug, make sure that the engine is switched off and has cooled down. - Always use the correct spark plug in accordance with the vehicle manufacturer's specifications. - Check the spark plug condition regularly and replace it if necessary. - Only remove the spark plug when the engine is cold to avoid burns. - Make sure that the spark plug is clean and free of deposits to ensure optimum ignition. - Never use damaged or defective spark plugs. - Observe the tightening torques when installing the spark plug in accordance with the vehicle manufacturer's specifications. - Keep the spark plug and the spark plug connector away from flammable liquids. - Avoid direct contact with the spark plug during operation to prevent burns. - Switch off the engine before removing or replacing the spark plug. Please note that these safety instructions are of a general nature. For detailed information and specific instructions on the use of the BRISK SILVER LPG RR15YS-1 spark plug, please consult the official manufacturer's documents.Manufacturer contact information
Manufacturer Contact
BRISK a.s. Tabor
Vozicka 2068
CZ 390 02 Tabor
https://www.brisk.cz/kontakty/centrala