- Product description
Quality hose with 67R-01 approval. Used for BRC kits, among other things, and is characterised by its particular robustness.
Size
Inner diameter 14mm
Outer diameter 22mm
Wall thickness 4.0mm (!)
Recommendation
We recommend using the spring band clamps for sealing.
Areas of application
Used in Landi Renzo (reducer filter gas injectors) and KME (reducer filters) systems, among others.
Replacement intervals
The gas hose is subject to wear and should be replaced every 2 years as part of an inspection to avoid gas odours.
Delivery
The hoses are stored in 25 metre rolls and are also supplied in one piece up to this length!
Safety instructions and warnings
Safety instructions for Thunderflex LPG/CNG hose 14x22mm (sold by the metre)
General safety instructions:
- The Thunderflex LPG/CNG hose may only be used for its intended purpose, namely the transport of LPG and CNG.
- The hose may only be operated by trained personnel.
- Only fittings and connectors approved for the Thunderflex LPG/CNG hose may be used.
- The maximum operating temperature of the hose is 70°C. No hot water or steam may flow through the hose.
- The hose must not come into contact with substances other than LPG or CNG.
- Only the maximum permissible pressures and temperatures may be used. These are specified on the manufacturer's website.
Storage & handling:
- The hose should ideally be stored in a cool, dry place and protected from direct sunlight.
- Impacts, blows and sharp-edged objects should be avoided.
- The hose must not be kinked or twisted. Gloves should be worn when handling the hose.
- Always check for visible damage or signs of wear before using the hose. If the hose is damaged, it must not be used.
Assembly:
- When fitting the hose, all connections must be checked for leaks. There must be no leaks.
- The fittings must also be checked for leaks.
- The hose may only be installed by qualified personnel.
- The fittings must be tightened to the recommended torque.