Valtek cut-off valve Type 07 Input M10x1- 6mm, Output M10x1 AMP

Safety instructions for Valtek shut-off valve type 07 inlet M10x1 (6mm), outlet M10x1 AMP

1. read all relevant instructions and safety instructions from the manufacturer carefully before installing and using the Valtek shut-off valve type 07.

2. ensure that you have the necessary expertise and skills to install and operate the valve safely.

3. ensure that all power sources are properly switched off before installing the valve to avoid the risk of electric shock.

4. ensure that the valve is properly installed in the intended connections. Check that the thread sizes are correct (inlet: M10x1 (6mm), outlet: M10x1 AMP).

5 Before opening the valve, make sure that the process in which the valve is integrated is properly secured and safe.

6. avoid contact with hot surfaces and liquids. If necessary, wear suitable protective equipment such as heat-resistant gloves. 7.

7. ensure that the valve is serviced regularly to ensure optimum performance and safety. Follow the maintenance intervals recommended by the manufacturer.

8. if there are any problems or uncertainties regarding the valve, contact the manufacturer or a qualified professional.

9. comply with all applicable laws and regulations regarding the installation and use of the valve.

10. observe all other specific safety and operating instructions provided by the manufacturer of the Valtek shut-off valve type 07.