- Product description
Sturdy mounting frame for mounting Cylindrical LPG tanks inside the vehicle, on the loading area of pickups or commercial vehicles when retrofitting LPG kits.
The mounting frame is ECE R67.01 compliant. It can also be used to securely fasten cylindrical camper propane tanks or LPG tanks.
All mounting frames are supplied with tensioning straps.
Important! Many mounting frames available on the market do not fulfil the R67.01 specifications as the tensioning straps or the frame itself do not meet the requirements of the standard.
Safety instructions and warnings
Safety instructions for mounting frames Ø 315/65L for Cylindrical LPG tanks, Cylindrical LPG tanks, RV propane tanks - R67.01 compliant
1 Installation of the mounting frame should only be carried out by a qualified person.
2. before installing the mounting frame, it must be ensured that it is suitable for the intended gas tank type and size.
3. the applicable national and international regulations and standards for the safe operation of gas cylinders and accessories must be observed during installation.
4. the mounting frame must be checked regularly for damage and wear. In the event of defects, the frame must be replaced immediately.
5 The mounting frame must not be modified or repaired. In the event of damage or defects, the frame must be replaced immediately.
6 When transporting the gas canister, it must always be properly anchored in the mounting frame.
7. no other objects may be placed on or around the mounting frame that could impair the safe operation of the gas canister.
8. the gas container and the mounting frame must be protected from moisture and aggressive chemical substances.
9. if there is any doubt about the safety of the mounting frame or the gas container, a qualified person should be consulted immediately.
Manufacturer contact information
The manufacturer
Grodkowskie Zak?ady Wyrobów Metalowych S.A
ul. Wroc?awska 59
49-200 Grodków
gzwm@gzwm.com.pl