- Product description
The fuel pressure emulator (variable pressure) is intended for use in vehicles in which a fault related to the pressure regulator circuit on the fuel rail occurs during gas operation.
pressure regulator circuit at the fuel rail during gas operation. The emulator is designed for operation with
STAG-300 control units.
The emulator is intended for the following GENERAL MOTORS vehicles:
- OPEL ASTRA 2009 1.6l (A 16 XER)
- CADILLAC ESCALADE EXT 2007 6.2l 8cyl
- GMC HUMMER H2 2007 6.2l 8cyl
Operating principle:
Due to the lack of fuel intake from the fuel rail in gas mode, the petrol pressure rises above its nominal value.
its nominal value. As a result, the petrol computer shortens the injection times (and/or reports a fault).
If it is emulated by a constant pressure value, the petrol computer recognises this as a problem
with the pressure control circuit at the fuel rail (reports a fault which may make it impossible to continue driving).
impossible). The FPE-GM emulator works with the regulator circuit and solves this problem.
Technical data
Supply voltage: 12V ±25%
Operating temperature: -40°C ÷ +70°C
Protection class: IP40
Safety instructions and warnings
Safety instructions for AC petrol pressure emulator FPE-GM:
- The device may only be installed by qualified personnel.
- Installation must be carried out in accordance with the manufacturer's instructions.
- All voltage sources in the vehicle must be disconnected before installation.
- The installation must be carried out in such a way that no cables can be damaged or come into contact with sharp edges or hot surfaces.
- The device must not be installed near flammable materials.
- The appliance must not be installed under water or other liquids.
- The appliance must not be dismantled or modified.
- Use the appliance at your own risk and the manufacturer accepts no liability for damage caused by improper installation or use.
- In the event of uncertainties or problems with the appliance, qualified specialist personnel must be contacted immediately.
Operating instructions for AC petrol pressure emulator FPE-GM:
- The device may only be used for its intended purpose and must be operated in accordance with the manufacturer's instructions.
- The power supply to the device must be guaranteed during operation.
- The appliance must not be overloaded and must be protected against overheating.
- All connections must be checked for tightness and damage before starting operation.
- The appliance must be protected from moisture and humidity.
- Care must be taken to ensure that the appliance is not damaged during operation.
- The appliance must not be operated in the vicinity of electromagnetic fields.
- Regular maintenance and inspections of the appliance are required to ensure safe operation.
Manufacturer Contact information
AC S. A.
15-181 Bia?ystok
ul. 42 Pu?ku piechoty 50
tel.: +48 85 743 81 00
biuro@ac.com.pl