- Product description
- Spare parts
- Accessories
Homologation number E8 67R-01 4303
Technical data IG1 Rail | |
| Working pressure | from 0.5 to 2.0 bar |
| Maximum pressure | 3.0 bar |
| Operating voltage | 10,8-14,4 V |
| Inlet connection | ø12 mm |
| Connections at the outlet | Pre-drilled nozzles M8x1 |
| Temperature range | -20° / + 120° C |
| Resistance | 2.0 Ohm |
| Minimum injection time | 3.3 ms |
| Open | 3.7 ms* |
| Close | 2.8 ms* |
* tested at 1 bar pressure 12V and 5ms total injection time
Safety instructions and warnings
Safety instructions for RAIL injector LPG CNG IG1 2x2 cylinder (BOXER) BLACK BODY 2 Ohm (old version)
- Before you start installing the appliance, make sure you fully understand the relevant safety requirements for handling LPG/CNG gases.
- The appliance should only be installed by qualified technicians who are familiar with LPG/CNG systems. Improper installation may result in serious injury or damage.
- Ensure that all components of the system are clean and free from contamination before starting the installation.
- The device should be installed in a well-ventilated area that is free from potential ignition sources.
- Use only certified and approved LPG/CNG components and accessories to ensure maximum safety and performance.
- Ensure that all electrical connections are properly installed and fused to minimise the risk of short circuits or other electrical malfunctions.
- Ensure that all gas pipes and connections are properly installed and sealed to minimise the risk of gas leaks. Regularly check all gas pipes and connections for leaks.
- Follow all operating and maintenance instructions provided by the manufacturer to ensure the safety and performance of the appliance.
Manufacturer contact information
Rail S.r.l.
Via A. Grandi, 16
42030 Vezzano Sul Crostolo (RE)
Italy
+39 0522 603 801
info@railgroup.it
