- Product description
- Spare parts
- Accessories
Homologation number E8 67R-01 4303
Technical data IG1 Rail | |
| Working pressure | from 0.5 to 2.0 bar |
| Maximum pressure | 3.0 bar |
| Operating voltage | 10,8-14,4 V |
| Inlet connection | ø12 mm |
| Connections at the outlet | Pre-drilled nozzles M8x1 |
| Temperature range | -20° / + 120° C |
| Resistance | 2.0 Ohm |
| Minimum injection time | 3.3 ms |
| Open | 3.7 ms* |
| Close | 2.8 ms* |
* tested at 1 bar pressure 12V and 5ms total injection time
Safety instructions and warnings
Safety instructions for RAIL injector LPG CNG IG1 4 cylinder BLACK BODY 2 Ohm (old version)
- Only use the product in accordance with the manufacturer's instructions.
- Ensure that the product is properly installed and connected.
- Regularly check the condition of the product and, if necessary, carry out maintenance and inspection work in accordance with the manufacturer's instructions.
- Observe the applicable safety regulations and technical standards.
- Ensure that the product is protected from moisture, dust and other harmful influences.
- Only use approved accessories and spare parts for the product.
- Keep the product away from flammable materials.
- Switch off the product before carrying out maintenance or repair work.
- Read all safety instructions and warnings in the manufacturer's instructions carefully and follow them.
- Keep the manufacturer's instructions and safety instructions in a safe place and ensure that they are accessible at all times.
Manufacturer contact information
Rail S.r.l.
Via A. Grandi, 16
42030 Vezzano Sul Crostolo (RE)
Italy
+39 0522 603 801
info@railgroup.it
