- Product description
- Accessories
Quality hose with 67R-01 approval.
Size
Inner diameter 11mm
Outer diameter 18mm
Wall thickness 3.5mm (!)
Areas of application
Used in VSI I+II systems, among others (filter injectors)
Replacement intervals
The gas hose is subject to wear and should be replaced every 2 years as part of an inspection to prevent gas odours.
Delivery
The hoses are stored in 25 metre rolls and are also supplied in one piece up to this length!
Safety instructions and warnings
Safety instructions for FARO GASLINE LPG/CNG hose 11x18mm (sold by the metre)
1. the FARO GASLINE LPG/CNG hose 11x18mm (sold by the metre) may only be used for its intended purpose.
2. before using the hose, ensure that it has no visible damage. If the hose is damaged, it must not be used.
3. the hose must not be overstretched, twisted or kinked.
4. the hose must be adequately secured to prevent it from falling or getting caught.
5. the hose must not be stored or used near heat sources, sharp edges or other sharp objects.
6. ensure adequate ventilation when using the hose.
7. the hose must not come into contact with oil, grease or other chemicals.
8. suitable protective equipment must be worn when using the hose, e.g. gloves or safety goggles.
9. the hose must not be used in the vicinity of electrical cables or other power sources.
10. the hose must be checked regularly for damage or wear.
11. the hose must be stored properly after each use.
12. observe the manufacturer's specifications for maximum operating temperature and maximum operating pressure.
Manufacturer contact information
Manufacturer contact information
OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it
