- Product description
- Accessories
Quality hose with 67R-01 approval.
Size
Inner diameter 19mm
Outer diameter 28mm
Wall thickness 4.5mm (!)
Areas of application
Mainly used in venturi systems (reducer adjusting screw/stepper motor)
Replacement intervals
The gas hose is subject to wear and should be replaced every 2 years as part of an inspection to avoid gas odours.
Delivery
The hoses are stored in 25 metre rolls and are also supplied in one piece up to this length!
Safety instructions and warnings
Safety instructions for FARO GASLINE LPG/CNG hose 19x28mm (sold by the metre)
1. use the hose only for the specified purpose and in accordance with the manufacturer's instructions.
2. regularly check the condition of the hose for damage or signs of wear. If there are signs of damage, the hose should no longer be used.
3. ensure that the hose is correctly connected and firmly secured to prevent unintentional loosening during operation.
4. ensure that the hose is not kinked or excessively bent so as not to impair the flow rate.
5. keep the hose away from sources of heat, naked flames or other potential sources of ignition.
6. avoid contact of the hose with sharp edges or aggressive chemicals as this may cause damage.
7. ensure that the hose is not pressurised when not in use to avoid potential hazards.
8. observe the applicable safety rules and regulations for handling LPG/CNG hoses.
9. if you have any uncertainties or questions about handling the hose, consult the manufacturer's instructions or contact the manufacturer.
These safety instructions only serve as general guidelines. For detailed safety information, please consult the official manufacturer documentation and safety instructions.
Manufacturer contact information
Manufacturer contact information
OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it
