- Product description
- Media & Downloads
- Accessories
The Alugas TravelMate is the LPG tank for motorhomes, camper vans and caravans that can be safely retrofitted by workshops in a short space of time. The highlight of the refillable gas bottle is that campers can leave the Europe-wide complex exchange system of heavy gas bottles behind and refuel with LPG freely and flexibly at any petrol station. This not only saves them travelling to the DIY store, but above all gives them freedom and flexibility. The cylinder can simply be refuelled at any filling level. This means that before the campers want to be self-sufficient on the road, the LPG tank is filled up again. This puts an end to worrying about the remaining gas and the space-consuming reserve bottle.
The Alugas TravelMate refillable gas cylinder is supplied pre-assembled with a so-called multivalve. In addition to all the necessary safety features, the valve also offers the so-called 80% filling stop, which makes refuelling possible at any filling level. In addition, the fill level indicator attached to the valve provides information about the current fill level in the bottle.
A wide range of accessories is available for optional selection, including a fastening holder or a remote display.
Attention! The direct refuelling adapter is only an additional option for refuelling the cylinder in emergencies and is not approved by the manufacturer. A filling valve with integrated non-return valve must always be installed when refuelling.
Material | Aluminium |
Inspection interval | 10 years inspection interval |
80% filling stop valve | included |
Safety valve | 27 bar pressure relief valve |
Tare weight | 6,60 Kg |
Filling & extraction | separate |
Level indicator | included |
Remote level indicator | retrofitting possible |
Inlet | 1/2" external thread |
Outlet | EN15252: G.12 = W21,8 x 1/14 LH |
With seal | |
Gross filling weight | 27,20 liters |
Net filling weight (80%) | 21,76 liters |
Height | 597 mm |
Height (without collar) | 557 mm |
Diameter | 300 mm |
Homologation | PED 2014/68/EU |
EN 13110:2012 |