BRC ZB Zenith CNG 2.5 bar reducer for 200 bar incl. MV and HD- + Temp-Sensor

Safety instructions for BRC ZB Zenith CNG 2.5 bar pressure reducer 200 bar incl. MV and HP and temp sensor

1 Assembly and installation:

- Ensure that the installation is carried out in accordance with the manufacturer's instructions.

- Before installation, check that all components of the pressure reducer are intact.

- Observe the specified tightening torques for the fastening screws.

2. operation:

- Only use the pressure reducer in accordance with the manufacturer's instructions and areas of application.

- Check the operating pressure regularly and ensure that it is within the recommended range.

- Ensure that the pressure reducer is not overloaded.

- Clean the pressure reducer according to the manufacturer's instructions.

3. maintenance:

- Carry out regular inspections of the pressure reducer and replace worn or damaged parts in good time.

- Observe the maintenance intervals specified by the manufacturer.

- Keep the pressure reducer free of dirt, deposits or other contaminants.

4 Safety instructions:

- Read the operating instructions for the pressure reducer carefully and follow all instructions contained therein.

- Observe all warning notices and symbols on the pressure reducer.

- Do not use the pressure reducer if it is damaged or defective.

- Keep children away from the pressure reducer.

Please note that this is not a comprehensive list and you should refer to the official manufacturer documents for more information.