- Product description
After two years of development, FARO presents the FastyFit system for the LPG automotive market. It is a quick connection system that will revolutionise the current way of installing lines.
FastyFit is a patented and ECE R67.01 homologated system that has been developed from a deep understanding of the problems and requirements that arise when installing LPG systems.
- increased safety
- easier installation
- time and cost savings
The FastyFit product line isdesignedexclusively for FAROPREMIUM flexible pipesand cannot be used for metal pipes. The product line consists of:
-FastyFitquick: six fittings, each straight and 90° for 6 and 8 mm pipes, 100% tested and equipped with a special O-ring to withstand the high temperature fluctuations and aggressive substances when operating with LPG.
-FastyFitnipple: two pipe sockets with plug-in connection profile for 6 and 8 mm pipes
-FastyFitkey: special spanner to release the quick-fit connections of 6 and 8 mm pipes
-FastyFitlubricant: Lubricant to reduce friction and wear. The chemical formula required many months of development and laboratory testing and was developed using parameters such as the Stribeck curve.
Safety instructions and warnings
Safety instructions for FARO FASTYFIT Fitting Set 6mm (pipe socket, union nut, cutting ring, quick connector)
- Only use the fitting set in accordance with the manufacturer's instructions.
- Ensure that you have the necessary knowledge and skills to use the set safely.
- Wear suitable personal protective equipment such as gloves and safety goggles when handling the set.
- Before each use, check that all components of the set are in perfect condition. Do not use any damaged or defective parts.
- Ensure that the set is only used for the intended applications.
- Keep the working environment clean and tidy to avoid tripping or other accidents.
- Store the set in a dry and safe place to prevent damage.
- Observe the correct assembly and disassembly technique when connecting the pipe sockets, union nut, cutting ring and quick connector.
- Avoid overloading the set and adhere to the maximum permissible load limits.
- Observe the applicable safety regulations and standards when using the set.
- If you have any questions or problems, please contact the manufacturer or authorised specialists.
Manufacturer contact information
Contact manufacturer
OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it