- Product description
After two years of development, FARO presents the FastyFit system for the LPG automotive market. It is a quick connection system that will revolutionise the current way of installing lines.
FastyFit is a patented and ECE R67.01 homologated system that has been developed from a deep understanding of the problems and requirements that arise when installing LPG systems.
- increased safety
- easier installation
- time and cost savings
The FastyFit product line isdesignedexclusively for FAROPREMIUM flexible pipesand cannot be used for metal pipes. The product line consists of:
-FastyFitquick: six fittings, each straight and 90° for 6 and 8 mm pipes, 100% tested and equipped with a special O-ring to withstand the high temperature fluctuations and aggressive substances when operating with LPG.
-FastyFitnipple: two pipe sockets with plug-in connection profile for 6 and 8 mm pipes
-FastyFitkey: special spanner to release the quick-fit connections of 6 and 8 mm pipes
-FastyFitlubricant: Lubricant to reduce friction and wear. The chemical formula required many months of development and laboratory testing and was developed using parameters such as the Stribeck curve.
Safety instructions and warnings
Safety instructions for FARO FASTYFIT pipe sockets for quick connectors 8mm
1. the relevant instructions should be read and understood carefully before installing the product
2. the product should only be installed and maintained by trained professionals.
3. the product must not be used in areas where there is a risk of explosion.
4. the product should not be overloaded. The maximum load capacity is stated in the technical specifications.
5. the product should be checked for wear and damage at regular intervals.
6. the product should not be modified or repaired without the manufacturer's authorisation.
7. ensure that the product is properly installed and secured before putting it into operation.
8. it is important to follow the manufacturer's instructions for use of the product to ensure that it is used correctly and safely.
Manufacturer contact information
Manufacturer Contact
OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it