- Product description
After two years of development, FARO presents the FastyFit system for the LPG automotive market. It is a quick connection system that will revolutionise the current way of installing lines.
FastyFit is a patented and ECE R67.01 homologated system that has been developed from a deep understanding of the problems and requirements that arise when installing LPG systems.
The advantages of FastyFit are obvious, and consist primarily of
- increased safety
- easier installation
- time and cost savings
The FastyFit product line isdesignedexclusively for FAROPREMIUM flexible pipesand cannot be used for metal pipes. The product line consists of:
-FastyFitquick: six fittings, each straight and 90° for 6 and 8 mm pipes, 100% tested and equipped with a special O-ring to withstand the high temperature fluctuations and aggressive substances when operating with LPG.
-FastyFitnipple: two pipe sockets with plug-in connection profile for 6 and 8 mm pipes
-FastyFitkey: special spanner to release the quick-fit connections of 6 and 8 mm pipes
-FastyFitlubricant: Lubricant to reduce friction and wear. The chemical formula required many months of development and laboratory testing and was developed using parameters such as the Stribeck curve.
- increased safety
- easier installation
- time and cost savings
The FastyFit product line isdesignedexclusively for FAROPREMIUM flexible pipesand cannot be used for metal pipes. The product line consists of:
-FastyFitquick: six fittings, each straight and 90° for 6 and 8 mm pipes, 100% tested and equipped with a special O-ring to withstand the high temperature fluctuations and aggressive substances when operating with LPG.
-FastyFitnipple: two pipe sockets with plug-in connection profile for 6 and 8 mm pipes
-FastyFitkey: special spanner to release the quick-fit connections of 6 and 8 mm pipes
-FastyFitlubricant: Lubricant to reduce friction and wear. The chemical formula required many months of development and laboratory testing and was developed using parameters such as the Stribeck curve.
Safety instructions and warnings
Safety instructions for FARO FASTYFIT quick connector 6mm - M10x1 straight:
- Installation may only be carried out by trained specialists.
- Only original FARO parts may be used.
- It must be ensured that the quick connector is only used for its authorised application.
- It may only be operated within the specified load and pressure ranges.
- Ensure that the quick connector is correctly fitted and secured before operating the device.
- Before commissioning, all connections should be checked for leaks and tightness.
- Ensure that the quick connector is not subjected to any unnecessary stress or vibration.
- Ensure that the quick connector is checked regularly for wear and damage.
- If the quick connector is damaged or worn, it should be replaced immediately.
- If you have any questions or problems regarding the installation or operation of the quick connector, please contact the manufacturer.
Manufacturer contact information
Contact manufacturer
OMB Saleri S.P.A.
Via Rose di Sotto 38
25126 Brescia BS
Italy
info@faro-brescia.it