- Product description
Quality hose with 67R-01 approval. Used for BRC kits, among other things, and is characterised by its particular robustness.
Size
Inner diameter 10mm
Outer diameter 17mm
Wall thickness 3.5mm (!)
Recommendation
We recommend using the spring band clamps for sealing.
Areas of application
Used in some 3/4-cylinder BRC systems, among others (reducer filter injectors)
Replacement intervals
The gas hose is subject to wear and should be replaced every 2 years as part of an inspection to prevent gas odours.
Delivery
The hoses are stored in 25 metre rolls and are also supplied in one piece up to this length!
Safety instructions and warnings
Safety instructions for Thunderflex LPG/CNG hose 10x17mm (sold by the metre)
- The Thunderflex LPG/CNG hose may only be used for its intended purpose and must comply with the applicable standards.
- The hose must not be used for other media or applications.
- The maximum operating temperature of the hose is 70°C.
- The hose must not be laid or stored near hot surfaces.
- The hose must be checked regularly for damage and wear. If the hose is damaged or worn, it must be replaced immediately.
- The hose must be protected from direct sunlight, weather conditions and chemical influences such as oils.
- The hose must be connected to the gas pipe by a specialist.
- The hose must not be kinked or twisted, as this can lead to damage.
- The hose must be completely drained before disconnecting it from the gas pipe.
- The Thunderflex LPG/CNG hose must not be used for vehicles with LPG/CNG kits that are not authorised for road use.