Injector nozzle for Valtek rail G 1/8’’ D. 6 mm (3,50 mm)

Safety instructions for injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm Bore hole)

1. read and follow all the manufacturer's instructions and precautions before using the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm bore hole).

2. always wear suitable protective equipment, such as safety goggles and gloves, when using the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm bore hole).

3. regularly check the condition of the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm bore hole) for damage. Do not use the product if it is defective.

4. keep the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm bore hole) out of the reach of children and pets.

5. use the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm Bore hole) only for its intended purpose and in accordance with the manufacturer's instructions.

6. store the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm Bore hole) in a dry and safe place, away from heat and flames.

7. clean the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm bore hole) after each use according to the manufacturer's instructions.

8. observe all relevant safety regulations and instructions when handling chemical substances used with the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm bore hole).

9. if you have any problems or questions regarding the injector nozzle G 1/8''D.6mm - for Valtek T30 injector (3.50mm bore hole), please contact the manufacturer or an authorised specialist.