Faceplate for injection rail IG3 Horizon M18x1

Safety instructions for blanking plug M18x1 for IG3 Horizon injector rail:

- Before installing the dummy plug, make sure that the injector rail is switched off and de-energised.

- Check the condition of the dummy plug before installation. Do not use damaged or faulty dummy plugs.

- Ensure that the blanking plug is screwed correctly into the thread of the injector rail. Do not overtighten it to avoid damage.

- Observe the applicable safety regulations when installing the dummy plug and use protective equipment such as gloves or safety goggles if necessary.

- Only insert the dummy plug into the designated openings in the injector rail.

- Observe the maximum permissible temperature and pressure specifications for the dummy plug and ensure that these are not exceeded.

- If you are unsure or have questions about the installation or use of the dummy plug, consult the manufacturer's instructions or contact the manufacturer directly.

- Observe the applicable safety regulations and guidelines when handling the dummy plug.

- Store the dummy plug in a dry and clean place to prevent damage or contamination.