- Product description
- Spare parts
- Accessories
Homologation number E8 67R-01 4303
Technical data IG1 Rail | |
| Working pressure | from 0.5 to 2.0 bar |
| Maximum pressure | 3.0 bar |
| Operating voltage | 10,8-14,4 V |
| Inlet connection | ø12 mm |
| Connections at the outlet | Pre-drilled nozzles M8x1 |
| Temperature range | -20° / + 120° C |
| Resistance | 3.0 Ohm |
| Minimum injection time | 3.3 ms |
| Open | 3.7 ms* |
| Close | 2.8 ms* |
* tested at 1 bar pressure 12V and 5ms total injection time
Safety instructions and warnings
Safety instructions for RAIL injector LPG CNG IG1 3 cylinder BLACK BODY 3 Ohm (old version)
- Please use the product only in accordance with the manufacturer's instructions.
- Before installing the product, make sure that the vehicle is completely switched off and that the battery is disconnected.
- Installation should only be carried out by trained specialists.
- If you have any problems or questions regarding installation, please contact the manufacturer or an authorised dealer.
- Ensure that all connection points and cables are firmly and securely connected.
- Only use approved and compatible fuels in conjunction with this product.
- The installation of the product may affect the vehicle warranty. Therefore, check the warranty conditions before installation.
Manufacturer contact information
Rail S.r.l.
Via A. Grandi, 16
42030 Vezzano Sul Crostolo (RE)
Italy
+39 0522 603 801
info@railgroup.it
