- Product description
- Media & Downloads
Sturdy mounting frame for mounting Cylindrical LPG tanks inside the vehicle, on the loading area of pickups or commercial vehicles when retrofitting LPG kits.
The mounting frame is ECE R67.01 compliant. It can also be used to securely fasten cylindrical camper propane tanks or LPG tanks.
All mounting frames are supplied with tensioning straps.
Important! Many mounting frames available on the market do not fulfil the R67.01 requirements as the tensioning straps or the frame itself do not meet the requirements of the standard.
Technical data
incl. 4straps (67R-01 compliant)
Width of the individual straps: 50mm
Thickness of the individual straps: 3mm
Fixing screws: 1 x M10 + 2 x M8
Only 2 hinges are factory-fitted to this frame. Holes for the additional 2 hinges must be re-drilled.
Safety instructions and warnings
Safety instructions for mounting frame Ø 400/90-95L for Cylindrical LPG tanks, Cylindrical LPG tanks, RV propane tanks - R67.01 compliant
1. before installing the mounting frame, ensure that all relevant national and international safety regulations are complied with.
2. use only the fixing materials recommended by the manufacturer to ensure safe installation of the frame.
3. ensure that the mounting frame is firmly attached to the structure to prevent the tank from slipping or falling.
4. regularly check the condition of the mounting frame and carry out maintenance work if necessary in order to recognise and rectify any damage at an early stage.
5 Ensure that the mounting frame fulfils the specified load capacity for the tank to ensure safe use.
6. follow the manufacturer's specific instructions for installing and using the mounting frame.
7. find out about the appropriate safety precautions for handling LPG (liquefied petroleum gas) and strictly adhere to the relevant regulations.
8. ensure that the mounting frame is properly installed and that all connections are tight.
9. avoid any tampering with the mounting frame and contact an authorised specialist if necessary.
10. follow all other safety and operating instructions provided by the manufacturer to ensure safe use of the mounting frame.
Manufacturer contact information
Manufacturer Contact
Grodkowskie Zak?ady Wyrobów Metalowych S.A
ul. Wroc?awska 59
49-200 Grodków
gzwm@gzwm.com.pl
incl. 4 straps (67R-01 compliant)
Width of each strap: 50mm
Thickness of each strap 3mm
Fixing screws: 1 x M10 + 2 x M8
On this frame, only 2 straps are provided from the factory. Holes for the additional 2 bands must be re-drilled
.