- Product description
- Media & Downloads
Sturdy mounting frame for mounting Cylindrical LPG tanks inside the vehicle, on the loading area of pickups or commercial vehicles when retrofitting LPG kits.
The mounting frame is ECE R67.01 compliant. It can also be used to securely fasten cylindrical camper propane tanks or LPG tanks.
All mounting frames are supplied with tensioning straps.
Important! Many mounting frames available on the market do not fulfil the R67.01 requirements as the tensioning straps or the frame itself do not meet the requirements of the standard.
Technical data
incl. 4straps (67R-01 compliant)
Width of the individual straps: 50mm
Thickness of the individual straps: 3mm
Fixing screws: 1 x M10 + 2 x M8
Only 2 hinges are factory-fitted to this frame. Holes for the additional 2 hinges must be re-drilled.
Safety instructions and warnings
Safety instructions for mounting frame Ø 400/100-105L for Cylindrical LPG tanks, RV propane tanks, camper propane tanks - R67.01 compliant
1. assembly and installation:
- Ensure that the mounting frame is firmly and securely fastened to the floor or wall.
- Follow the manufacturer's instructions for correct assembly and installation of the frame.
- Use only the recommended mounting hardware and tools.
2. weight restrictions:
- Do not overload the mounting frame with more weight than specified.
- Ensure that the load limits of the frame are not exceeded.
3. maintenance and inspection:
- Regularly check the condition of the mounting frame for damage or wear.
- Ensure that all connections and fastening elements are securely and firmly tightened.
- Clean the frame regularly and remove dirt and deposits.
4. safety regulations:
- Follow all applicable safety regulations and guidelines for the use of the mounting frame.
- Follow the manufacturer's specific safety instructions for handling Cylindrical LPG tanks, camper propane tanks and RV propane tanks.
- Keep the mounting frame away from heat sources, open flames and other potentially dangerous situations.
5. storage instructions:
- Store the mounting frame in a dry and well-ventilated place.
- Protect the frame from moisture, extreme temperatures and other harmful environmental influences.
- Keep the frame out of the reach of children and unauthorised persons.
Manufacturer contact information
Manufacturer contact
Grodkowskie Zak?ady Wyrobów Metalowych S.A
ul. Wroc?awska 59
49-200 Grodków
gzwm@gzwm.com.pl
incl. 4 straps (67R-01 compliant)
Width of each strap: 50mm
Thickness of each strap 3mm
Fixing screws: 1 x M10 + 2 x M8
On this frame, only 2 straps are provided from the factory. Holes for the additional 2 bands must be re-drilled
.