Mounting frame Ø 300/60L for Cylindrical LPG tanks, camper propane tanks, vapour tanks - R67.01 compliant

Safety instructions for mounting frames Ø 300/60L for Cylindrical LPG tanks, camper propane tanks - R67.01 compliant

1. before installing the mounting frame, ensure that all national and regional regulations and directives are complied with.

2. use the mounting frame exclusively for its intended purpose, namely for the safe installation of Cylindrical LPG tanks, camper propane tanks or RV propane tanks with a diameter of 300 mm and a length of 60 litres.

3. check the condition of the mounting frame for damage before installation. Do not use the frame if it has cracks, breaks or other structural defects.

4 Ensure that the mounting frame is properly and firmly attached to the intended mounting surface. Use suitable fastening materials such as screws, nuts and washers in accordance with the manufacturer's instructions.

5. ensure that the mounting frame has sufficient load-bearing capacity to support the weight of the Cylindrical LPG tank, Cylindrical LPG tank or RV propane tank. Check the maximum permissible load as specified by the manufacturer.

6. before using the mounting frame, make sure that all pipes and connections are properly installed and have no leaks. Check regularly for leaks and carry out repairs if necessary. 7.

7. follow any specific safety instructions provided by the manufacturer of the Cylindrical LPG tank, camper propane tank or RV propane tank. These may contain information on safe handling, storage and maintenance.

8. keep the mounting frame and surrounding areas clean and free of debris. Avoid the ingress of water, oil or other harmful substances that could impair functionality.

9. in the event of problems or uncertainties regarding the mounting frame, contact the manufacturer or a qualified specialist for support and advice.