- Product description
Narrow band: concentrated clamping force transmission, less weight 360° stepless: even compression or surface pressure Clamping ear: compensation of component tolerances, adjustable surface pressure Bead: increased clamping force Burr-free band edges: reduced risk of damage to the material to be bound
Technical data
Stainless steel, material no. 1.4301/UNS S30400
Band thickness: 0.5 mm / Band width: 5 mm
Diameter range: 8.8 - 10.5
Safety instructions and warnings
Safety instructions for Oetiker stepless ear clamp 8.8 - 10.5 mm stainless steel
1. use the Oetiker stepless ear clamp only for its intended purpose.
2. make sure that the clamp is correctly sized and firmly seated on the tube.
3. check the fit of the clamp regularly to prevent accidental loosening.
4. wear suitable protective gloves when installing and handling the clamp.
5 Ensure that there are no sharp edges or damage to the clamp.
6 Do not use the terminal if it is rusty or corroded.
7. observe the maximum permissible load on the clamp as specified by the manufacturer.
8. store the clamp in a dry place to prevent corrosion.
9. do not use the terminal at extreme temperatures outside the specified range.
10. follow the manufacturer's specific instructions regarding installation and maintenance.
Manufacturer contact information
Contact manufacturer
Oetiker Switzerland AG
Spätzstrasse 11
P.O. Box 358
CH-8810 Horgen
https://www.oetiker.com/de-de/contact-us
EU Contact
Oetiker Germany GmbH
Üsenbergerstr. 13
79346 Endingen
Endingen Germany
https://www.oetiker.com/de-de/contact-us