- Product description
BRISK Silver LPG/ CNG DR12YS
Width across flats: 16 mm
External thread: 19 mm
Thread diameter: M 14 x 1.25 mm
Electrode gap: 0.7 mm
Torque: 20-30 Nm
Replacement interval: max. 30,000 km
Brisk code: 1546
The BRISK Silver Line has been specially designed for the requirements of LPG/CNG fuelled vehicles. The silver centre electrode has a smaller diameter than conventional spark plugs and significantly reduces the voltage requirement due to its small electrode gap.
BRISK Silver spark plugs can be used in both petrol and gas-powered vehicles.
You can find the current BRISK catalogue and a selection guide in our download area by clicking here.
Safety instructions and warnings
Safety instructions for BRISK SILVER LPG DR12YS spark plug:
- Before installing the spark plug, ensure that the engine is switched off and has cooled down. - Only a qualified person should install the spark plug. - Check the spark plug for damage or deviations before installation. - Tighten the spark plug to the correct torque in accordance with the manufacturer's specifications. - Do not use a damaged or defective spark plug. - Always wear gloves when handling the spark plug to avoid injury. - Do not use force to remove or insert the spark plug. - Do not overheat the spark plug or expose it to direct heat. - Do not drop the spark plug or strike it against hard surfaces. - Do not allow any foreign materials on the spark plug. - Check the spark plug regularly for wear and deposits and clean or replace if necessary. - Follow the vehicle manufacturer's instructions for maintenance and inspection of the spark plug. - If you are unsure or have problems with the spark plug, contact a specialist or the manufacturer.Manufacturer contact information
Contact manufacturer
BRISK a.s. Tabor
Vozicka 2068
CZ 390 02 Tabor
https://www.brisk.cz/kontakty/centrala