BRISK SILVER LPG LR15YS-9 spark plug
BRISK SILVER LPG LR15YS-9 spark plug

BRISK SILVER LPG LR15YS-9 spark plug

Article no.: 101564A
Manufacturer: BRISK

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

BRISK Silver LPG/ CNG LR15YS-9

Width across flats: 21 mm
External thread: 19 mm

Thread diameter: M 14 x 1.25 mm
Electrode gap: 0.9 mm

Torque: 20-30 Nm

Replacement interval: max. 30,000 km
Brisk code: 1464

The BRISK Silver Line has been specially designed for the requirements of LPG/CNG fuelled vehicles. The silver centre electrode has a smaller diameter than conventional spark plugs and significantly reduces the voltage requirement due to its small electrode gap.

BRISK Silver spark plugs can be used in both petrol and gas-powered vehicles.

You can find the current BRISK catalogue and a selection guide in our download area by clicking here.

Safety instructions and warnings

Safety instructions for BRISK SILVER LPG LR15YS-9 spark plug

- Only use the spark plug in accordance with the manufacturer's instructions.

- Make sure that the spark plug is suitable for your specific vehicle model.

- Switch off the engine and allow it to cool down before replacing the spark plug.

- Disconnect the spark plug cap before removing or installing the spark plug.

- Ensure a safe working environment and keep flammable materials away from the engine compartment.

- Check the condition of the spark plug regularly and replace it if it is damaged or worn.

- Avoid contact with flammable liquids or chemicals when handling the spark plug.

- Be careful when tightening the spark plug to avoid tightening or overtightening.

Operating instructions for BRISK SILVER LPG LR15YS-9 spark plug

- Observe the recommended maintenance intervals for replacing the spark plug.

- Keep the spark plug clean and free of deposits.

- Do not use a spark plug that is damaged or dirty.

- Carry out a correct adjustment of the electrode gap in accordance with the manufacturer's specifications.

- Ensure that the spark plug is firmly and securely screwed into the cylinder head bore.

- Observe the recommended tightening torque specification when inserting the spark plug.

Manufacturer contact information

Contact manufacturer

BRISK a.s. Tabor
Vozicka 2068
CZ 390 02 Tabor
https://www.brisk.cz/kontakty/centrala

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.