BRISK SILVER LPG MR12YS-9 spark plug
BRISK SILVER LPG MR12YS-9 spark plug

BRISK SILVER LPG MR12YS-9 spark plug

Article no.: 102221A
Manufacturer: BRISK

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

BRISK Silver LPG/ CNG MR12YS-9

Width across flats: 14 mm
External thread: 26.5 mm

Thread diameter: M 12 x 1.25 mm
Electrode gap: 0.9 mm

Torque: 15-20 Nm

Replacement interval: max. 30,000 km
Brisk code: 1718

The BRISK Silver Line has been specially designed for the requirements of LPG/CNG fuelled vehicles. The silver centre electrode has a smaller diameter than conventional spark plugs and significantly reduces the voltage requirement due to its small electrode gap.

BRISK Silver spark plugs can be used in both petrol and gas-powered vehicles.

You can find the current BRISK catalogue and a selection guide in our download area by clicking here.

Safety instructions and warnings

Safety instructions for BRISK SILVER LPG MR12YS-9 spark plug

General safety instructions:

  • The spark plug may only be installed and serviced by trained specialists.
  • The spark plug may only be used in an engine intended for this purpose.
  • Ensure that the spark plug is screwed in correctly and tightly to prevent possible loosening during operation.
  • The engine should be switched off and cooled down before the spark plug is replaced.

Safety instructions for operation:

  • Ensure that the spark plug is always clean and free of dirt to ensure fault-free operation.
  • The spark plug must not be touched with wet hands.
  • Ensure that the spark plug is not damaged in order to guarantee fault-free operation.
  • Do not attempt to repair or modify the spark plug.
Manufacturer contact information

Contact manufacturer

BRISK a.s. Tabor
Vozicka 2068
CZ 390 02 Tabor
https://www.brisk.cz/kontakty/centrala

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.