BRISK MOTO PREMIUM AR10ZS spark plug

Safety instructions for BRISK MOTO PREMIUM AR10ZS spark plug:

1. use

- The spark plug may only be used in motorbikes for which it is specified. - Ensure that the spark plug is correctly inserted into the cylinder head.

2. installation

- Before installing the spark plug, switch off the engine and disconnect the ignition cable from the spark plug connector. - Check the condition of the threaded hole in the cylinder head and clean it if necessary. - Carefully insert the spark plug into the threaded hole and tighten it to the correct torque to prevent damage or loosening.

3. maintenance

- Regularly check the condition of the spark plug for wear, damage or deposits. - If necessary, clean the spark plug or replace it if it is dirty or damaged. - Ensure that the electrode gaps are within the tolerances specified by the manufacturer.

4. safety instructions

- Never touch the spark plug when the engine is running or has been running for a short time, as it can be very hot. - Keep spark plugs out of the reach of children and pets. - Do not use damaged or unsuitable spark plugs.

5 Disposal

- Dispose of used spark plugs in accordance with local regulations for hazardous waste.

Important note:

The above safety and operating instructions are for guidance only. Please consult the manufacturer's official instructions and other valid sources for specific information on the use of the BRISK MOTO PREMIUM AR10ZS spark plug.