BRISK FOR MOTORCYCLES BR15YC spark plug

Safety instructions for BRISK FOR MOTORCYCLES BR15YC spark plug

Installation and maintenance:

• The BRISK FOR MOTORCYCLES BR15YC spark plug may only be installed by qualified specialists.
• The spark plug may only be used in engines for which it is specified.
• When installing the spark plug, the torques recommended by the manufacturer for tightening the spark plug must be observed.
• Before installing the spark plug, the thread of the cylinder head must be carefully cleaned to ensure that the spark plug is seated correctly.
• The spark plug must not be overtightened, as this can lead to damage.
• The spark plug must not be overtightened, as this can damage the thread and cause the spark plug to malfunction.
• The spark plug must not be cleaned with an air compressor.

Operation:

• The spark plug must be used in accordance with the vehicle manufacturer's instructions.
• The spark plug must not be operated at idle speed.
• The spark plug must not be overheated.
• The spark plug must not come into contact with water.
• The spark plug must not be cleaned with a coolant cleaner.
• The spark plug must not be used in an engine that is operated with a fuel other than that specified.
• The spark plug must not be used in an engine that is operated with a damaged or incorrectly fitted air filter.