BRISK A-LINE 40 ER15YPY-1 spark plug

Safety instructions for BRISK A-LINE 40 ER15YPY-1 spark plug:

- Before installing the spark plug, make sure that the engine has cooled down and the ignition is switched off. - Always use the correct spark plug in accordance with the vehicle manufacturer's specifications. - Before installation, check the condition of the spark plug for damage or dirt. - Take care not to overtighten the spark plug to avoid damaging the thread. - Do not use excessive torque when screwing in the spark plug to prevent it from seizing or breaking. - Ensure that the spark plug is tightened firmly, but not too tightly, to avoid stripping the thread. - Keep the spark plug and spark plug connector clean and free of oil or dirt. - When installing the spark plug, always use a suitable torque tool to ensure the correct tightening torque. - Check the condition of the spark plug regularly and replace it in good time if it is worn or damaged. - Observe the vehicle manufacturer's specific recommendations for the spark plug replacement interval. - If you have any uncertainties or questions regarding the installation or maintenance of the spark plug, contact a specialist or the manufacturer. Please note that these safety instructions are of a general nature and may not cover specific requirements of the vehicle manufacturer. In case of doubt, you should always follow the instructions of the manufacturer or a qualified specialist.