- Product description
PRODUCTION 2026
High-pressure hose KLF x M20x1.5 UEM x 450 mm
High-pressure hose for connecting a liquefied petroleum gas cylinder to a regulator
Connection: G.12 KLF x M20x1.5 UEM (cylinder connection x regulator connection)
· PVC
· DVGW-approved
· Cold-resistant down to -30 °C
Safety and warning instructions
Safety instructions for Cavagna gas hose G.36 (M20x1.5) x G.12 (KLF) with hose rupture protection – 450 mm
1. Use only for its intended purpose.
2. Before installation, ensure that the gas hose is in perfect condition and shows no visible damage.
3. Check the gas hose regularly for signs of wear or damage. Replace if necessary.
4. Do not overstretch or kink the gas hose, as this may compromise safety.
5. Do not use the gas hose near sharp edges or hot surfaces.
6. Keep the gas hose away from open flames or other sources of ignition.
7. If you smell gas or notice a leak in the gas hose, take immediate action: extinguish all flames or ignition sources, turn off the gas tap and have the gas hose checked or replaced.
8. Do not subject the gas hose to pressures exceeding its maximum operating pressure limit.
9. Do not allow the gas hose to come into contact with other chemicals or substances that could compromise its integrity.
10. Protect the gas hose from direct sunlight and extreme temperatures.
Manufacturer’s contact details
Manufacturer
Cavagna Group
Via Statale No. 11/13
25011 Ponte S. Marco di Calcinato
Brescia – Italy
https://www.cavagnagroup.com/contacts/
