- Product description
- Spare parts
- Accessories
Technical data Valtek T30 STD Rail | |
| Operating voltage | 12-16 V |
| Input connection | ø12 mm |
| Resistance | 1.0 Ohm |
| Opening at 0.1MPa | 3.1 ms |
| Closing at 0.1MPa | 1.8 ms |
The colour of the solenoid coils may vary, the resistance (1 Ohm) is important.
Area of application:
Valtek T30 is used in numerous systems, e.g. KME, STAG, ZENIT, Öcotec (note homologation number!) and others.
Scope of delivery:
1x VALTEK 4 cylinder injection rail 1 Ohm (yellow) including accessories (without injector nozzles!)
Homologation and manufacturer numbers:
Injectors: E4 67R - 010104
Safety instructions and warnings
Safety instructions for Valtek LPG injector CNG type 30 STD 1 Ohm 4 cylinder:
1. read the manufacturer's operating instructions thoroughly before using the product.
2 Ensure that the product is properly installed and maintained to ensure safe operation.
3. use the product only in accordance with the manufacturer's instructions
4. observe all relevant safety regulations and instructions given in the operating instructions or on the manufacturer's website.
5. regularly check the condition of the product and carry out any necessary maintenance and inspection work.
6. switch off the product and disconnect the mains plug before carrying out maintenance work or cleaning the product.
7 Only use accessories and spare parts recommended by the manufacturer.
8. ensure that the product is not overloaded and does not exceed the specified load limit.
9. keep the product away from moisture, heat sources and flammable materials.
10. switch off the product immediately and disconnect the mains plug if you notice any problems or irregularities and contact the manufacturer or authorised customer service.
Manufacturer contact information
VALTEK:
Westport Fuel System Italia s.r.l.
Via La Morra, 1
12062 Cherasco CN
Italy
info.valtek@wfsinc.com
