- Product description
- Spare parts
- Accessories
Technical data Valtek T30 STD Rail | |
| Operating voltage | 12-16 V |
| Input connection | ø12 mm |
| Resistance | 3.0 Ohm |
| Opening at 0.1MPa | 3.1 ms |
| Closing at 0.1MPa | 1.8 ms |
The colour of the solenoid coils may vary, the resistance (3 Ohm) is important.
Field of application:
Valtek T30 is used in numerous systems, e.g. KME, STAG, ZENIT and others.
Scope of delivery:
1x VALTEK 3 cylinder injector coil 3 Ohm (red) including accessories (without injector nozzles!)
Homologation and manufacturer numbers:
Injectors: E4 67R - 010104
Safety instructions and warnings
Safety instructions for Valtek LPG injector CNG type 30 STD 3 Ohm 3 cylinder
- Before you start installing or servicing the product, make sure that you have the appropriate knowledge and skills.
- The device may only be installed, maintained and repaired by qualified personnel.
- Read the manufacturer's instructions carefully and follow all instructions.
- Before working on the product, switch off all power sources and ensure that it is de-energised.
- Wear suitable protective equipment such as gloves and safety goggles when installing or maintaining the product.
- Only use spare parts and accessories recommended by the manufacturer.
- Ensure that all connections and joints are properly and firmly tightened.
- Regularly check the condition of the product and carry out any necessary maintenance work.
- Do not use the product if it is damaged or shows signs of malfunction.
- Keep the product out of the reach of children and unauthorised personnel.
- Observe all applicable safety regulations and standards when handling the product.
- If you have any problems or questions, contact the manufacturer or an authorised specialist.
Manufacturer contact information
VALTEK:
Westport Fuel System Italia s.r.l.
Via La Morra, 1
12062 Cherasco CN
Italy
info.valtek@wfsinc.com
