T-screw-in connection M14x1 D8x8x8 mm

Safety instructions for screw-in T-fitting M14x1 D. 8x8x8mm

• The screw-in T-fitting should only be installed by trained specialists.
• It is important to ensure that the thread of the T-fitting and the mating part are clean and free of dirt and debris.
• It is necessary to adhere to the maximum torque in accordance with the manufacturer's technical data in order to prevent overtightening and damage to the screw connection.
• The T-fitting should only be used for the intended application and should not be used for other purposes.
• Before installation, always check that the T-fitting and all associated parts are in perfect condition.
• It is important to observe the use of Teflon tape or other sealing products as specified by the manufacturer to ensure proper sealing.
• If the T-fitting is used in a high pressure system, a pressure relief valve should be installed to protect the system from overpressurisation.
• It is important to check the T-fitting regularly for damage or wear and replace it if necessary.
• When dismantling the T-fitting, make sure that the system is completely drained and that there is no risk of the mating part moving.