- Product description
BRC LPG conversion kit Sequent Plug&Drive MY10 - 4 cylinders
Premium system for converting vehicles with sequential injection to LPG operation, developed for engines with up to 4 cylinders.
Scope of delivery
- Sequent Plug&Drive MY10 control unit
- Electroinjectors IN03 MY09
- LPG reducer / pressure regulator for LPG
- Gas filter for the gas phase
- MAP sensor
- One Touch changeover switch
- Wiring harness and connection components
Technical features
- System: Sequent Plug&Drive MY10
- Design: LPG kit for sequential injection systems
- Suitable for engines with up to 4 cylinders
- Gas control unit: Sequent P&D MY10
- Control unit connection: FCI 64-pin
- Control unit housing material: Aluminium / plastic
- OBD communication via K and CAN
- Sequential switchover to gas operation
- Internal emulation of the petrol injectors
- Internal ignition advance unit for methane operation available
- MAP sensor included in the kit
- Gas signal for temperature and pressure available
- Water temperature sensor on pressure regulator present
- Aluminium injector rail
- Injector type: IN03 MY09
- Level indicator via changeover switch
- Gas filter Working pressure: 0 to 4.5 bar
- Gas filter operating temperature: -40 °C to 120 °C
- Gas filter approval: R67-01 and R110
- Control unit Operating temperature: -40 °C to 105 °C
- Control unit operating voltage: 7 V to 17 V
- Control unit maximum voltage: 24 V
- Control unit protection class: IP67
- Control unit approval: R67-01 and R110
Available variants according to injectors / power in kW:
Normal < 60 kW, Normal < 80 kW, Max < 100 kW, Max < 120 kW, Super Max < 140 kW
Information on EAB / R115:
If the vehicle is R115-compliant, a BRC EUROPA multivalve must be used. Multivalves from other manufacturers are not represented in BRC's R115 documentation.
- The application for EAB or R115 is then made using the form provided, stating the shop order number.
- Other applications cannot be considered.
- In case of doubt, availability must be requested by e-mail, stating the relevant components and a legible copy of the vehicle registration document.
- Availability enquiries will not be answered by telephone.
Safety and warning notices
- Installation, connection, adjustment and testing of the LPG kit may only be carried out by qualified personnel.
- Before commissioning, the system must be checked for proper installation, leaks and correct electrical connections.
- Only use in vehicles that are compatible with the BRC Sequent Plug&Drive MY10 system and the respective engine/cylinder configuration.
- Only use components for gas operation within the specified pressure, temperature and voltage ranges.
- When working on gas-carrying components, keep ignition sources away and ensure adequate ventilation.
Manufacturer information
BRC GAS EQUIPMENT: Westport Fuel Systems Italia S.r.l.
Via La Morra, 1 - 12062 - Cherasco (Cuneo) - ITALY
info.brc@wfsinc.com