- Product description
- Media & Downloads
- Spare parts
- Accessories
The DREHMEISTER LPG direct refuelling adapter with sintered filter enables the direct filling (without filling hose) of refillable gas bottles with G.5/G.12 connections and 80% fill stop valve at LPG filling stations or specialised dealers. The integrated sintered filter effectively removes impurities from the gas during the refuelling process, preventing potential blockages and damage to the equipment. Thanks to the integrated seal, the adapter is compatible with both small cylinder connection G.12 and large cylinder connection G.5.
Important note: Depending on the country, additional suitable country adapters such as ACME, bayonet, DISH or Euronozzle are required for refuelling. These can be purchased either individually or as a case set 128012.
Technical features:
- Material: High-quality brass for maximum durability
- Threaded connection (bottle side): W21.8x1/14" Female thread, compatible with small bottle connection G.12 and large bottle connection G.5 thanks to seal
- Threaded connection (adapter side): W21.8 x 1/14" Female thread for connection with LPG adapters such as ACME, DISH, bayonet or Euronozzle
- Integrated sintered filter for effective removal of gas impurities
- Compact design with a length of 73 mm
- Easy handling and quick installation
Areas of application:
- Direct refuelling of refillable gas bottles at LPG filling stations
- Ideal for use in motorhomes, when camping or in mobile gas supply systems
Safety instructions and warnings
Safety instructions and warnings:
- Only use for the intended purpose: The LPG direct refuelling adapter with sintered filter is intended exclusively for filling refillable gas bottles with an 80% fill stop valve at LPG filling stations. Improper use can lead to serious damage or danger.
- Not a complete replacement for a redundant safety system: Although the adapter has an integrated sintered filter, it does not replace any prescribed safety systems or non-return valves in LPG conversion kits.
- Danger due to improper use: The adapter may only be used by competent persons who are familiar with refuelling refillable gas bottles. Improper handling can lead to gas leaks or malfunctions.
- Check for leaks before each use: Before use, ensure that all connections are tightly screwed and gas-tight. Leaking gas connections can lead to serious safety risks.
- No unauthorised conversions or modifications: Changes to this product may impair safety and will invalidate any warranty and liability.
- Regular maintenance required: The integrated sintered filter reduces the ingress of impurities, but should be checked regularly and replaced if necessary to ensure proper function.
- Use only outdoors or in well-ventilated areas: Operation or refuelling with this adapter must never take place in enclosed or insufficiently ventilated areas to avoid the risk of suffocation and explosion.
- Observe legal regulations: The operation and use of this adapter must comply with local regulations for LPG systems. If in doubt, consult a specialist.
- Check the product regularly for wear and tear: The adapter must be checked regularly for damage or material fatigue. Defective or worn parts must be replaced immediately.
Exclusion of liability:
Use this product at your own risk. The manufacturer and dealer accept no liability for damage caused by improper handling, incorrect installation or failure to observe the safety instructions.
Manufacturer contact information
Manufacturer:
HybridSupply GmbH
Roggenhorsterstr. 9b
23556 Lübeck, Germany
