- Product description
Victron Buck-Boost DC-DC converter 25A for 12V and 24V systems ORI303025000
DC-DC converter fully adjustable 12v and 24
For charging from one battery to a second battery.
Used when the dynamo is CAN bus monitored and should remain connected to the starter battery, but a second battery bank should still be charged.
Settings via the USB connection with the free PC software from Victron
Can be used to charge a LiFePo battery.
The output voltage is adjustable.
The maximum output current is adjustable.
Input cut-off voltage is adjustable.
Two switching inputs can be assigned via software.
DC-DC converter for charging a 12V/24V service battery in vehicles with an intelligent dynamo.
The DC-DC converter Buck-Boost is a DC-DC converter for charging a 12V/24V service battery in vehicles with an intelligent dynamo. As these dynamos (driven by the on-board electronics of Euro 5 and 6 engines) do not always output the correct charging current, a DC-DC converter is crucial for charging the service battery correctly.
System for detecting when "engine is running"
Deep discharge of the vehicle's starter battery is prevented by a built-in system that detects when the engine is running, but instead of this detection system, the converter can also be activated by a programmable input (D+, CANbus or (+)15 connection).
Fully programmable
The converter can be fully programmed using a simple and user-friendly PC application (a USB type A plug to USB type B plug cable is required)
One product for 12V, 24V and 12/24V systems
The converter can be programmed to charge a 12V or 24V auxiliary battery from either a 12V or 24V alternator or starter battery.
Charging current and input current limitation
The output current is determined by the following factors:
-The maximum charging current setting.
-The setting of the maximum input current.
-The limitation of the maximum operating temperature of the converter.