- Product description
The Victron Energy charging station can be used for both 3-phase and 1-phase charging. It delivers a maximum of 22kW AC in 3-phase mode or 7.3kW in 1-phase mode. The station can be monitored and controlled using the integrated LCD touchscreen. An external residual current circuit breaker is required for protection (not included). A cable cross-section of 6 mm² is recommended for the installation cable. A qualified electrician should be consulted for the connection.
Powerful e-vehicle charging station
Our EV Charging Station (charging station for electric vehicles) can be operated in both three-phase and single-phase mode. It delivers a maximum of
22 kW AC in three-phase operation and 7.3 kW in single-phase operation.
WLAN communication
WLAN: 802.11 b/g/n for configuration, monitoring and control. The internal WLAN module can be used for initial setup as well as for
monitoring in access point mode or in station mode.
Simple operation and control via Bluetooth and the VictronConnect app
You have full control and an overview of all operating parameters and session statistics at a glance.
LCD touchscreen
It has a 4.3-inch LCD touchscreen for monitoring and control.
Illuminated ring for quick display of the device
It also has a fully programmable RGB light ring around the charging port to quickly determine the status of the device.
quickly determine the status of the device. This can be programmed via the web interface in such a way that, depending on the current status (disconnected,
charged, charged, etc.) different light effects are displayed