- Product description
The MPPT VE.Can SmartSolar charger utilises the latest and fastest technology to convert energy from a solar system into energy that optimally charges a battery bank.
The SmartSolar charge controller even recharges a heavily discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulphated or otherwise damaged.
The MPPT VE.Can SmartSolar charger is connected to a PV array with 150 or 250 volts Voc and automatically recognises and charges your 12, 24 or 48V battery bank with current in the range of 70 to 100A, depending on the model.
The charge settings are fully programmable and can even be set for different battery chemistries such as lead-acid, lithium and others.
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured via Bluetooth using the VictronConnect app. This enables device setup, management and at-a-glance information such as battery voltage and current, PV voltage and current and historical data.
The VE.Can SmartSolar charger is equipped with CAN bus connections. This enables communication with other VE.Can SmartSolar chargers. The additional devices are simply "daisy-chained" between the individual devices using a single RJ45 cable.
When connected, all individual VE.Can SmartSolar chargers synchronise their charging levels. They can also send their data to a GX monitoring device via a single cable.
When the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full performance of your solar chargers
For remote installations - even if there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.
Like our other MPPT solar chargers, the VE.Can SmartSolar charger is also equipped with a VE.Direct connection. This connection can be used for monitoring individual devices or for controlling street lights. The remote on/off plug can be controlled externally by a third-party device such as a lithium battery.