- Product description
The Victron Energy charging station can be used in both 3-phase and 1-phase mode. It delivers a maximum of 22kW AC in 3-phase mode or 7.3kW in 1-phase mode. The internal WLAN module can be configured for initial setup as well as for monitoring in access point mode or in station mode. An external residual current circuit breaker is required for protection (not included). A cable cross-section of 6-10 mm² is recommended for the installation cable. A qualified electrician should be consulted for the connection.
Powerful e-vehicle charging station
The EV Charging Station NS (electric vehicle charging station NS) can be operated in both three-phase and single-phase mode. It delivers a maximum of
22 kW AC in three-phase operation and 7.3 kW in single-phase operation. It is equipped with a blue front. Alternatively, a black or
black or white front can be purchased separately.
WLAN communication
WLAN: 802.11 b/g/n for configuration, monitoring and control. The internal WLAN module can be used for initial setup as well as for
monitoring in access point mode or in station mode.
Simple operation and control via Bluetooth and the VictronConnect app
You have full control and an overview of all operating parameters and session statistics at a glance.
Illuminated ring for quick display of the device status
The charging station has a fully programmable RGB light ring around the charging port, which allows you to quickly determine the device status.
can be determined quickly. It can be programmed via the integrated web interface so that it switches on and off depending on the current status (disconnected, charged, etc.),
charged, charged, etc.) to display different light effects.