- Product description
- Accessories
The BRC Europa 3 multivalves are homologated according to European standard ECE 67R-01. It fulfils important technical and safety-relevant functions when operating vehicles on LPG.
The BRC Europa 3 LPG multivalve is the successor to the Europa 1 and Europa 2 multivalves, over 2 million of which have already been produced.
The Europa 3 version differs from the previous versions already in the production process, which has been improved by the use of new assembly lines that guarantee an optimisation of the work processes and make the component more reliable and easier to trace.
The Europa 3 multivalve meets the needs of installers and simplifies assembly work thanks to a new pipework configuration and a smaller and more compact solenoid valve group. The 80% fill stop has also been further improved and made more reliable.
The Europa 3 multivalves are available for both annular and cylindrical LPG tanks, in Standard and Max versions, the latter being designed for higher power engines.
Model type Standard 6mm
Compatible Toroidal external LPG tank 220mm diameter
Installation angle 0°
Inlet M12x1 male thread
Output M10x1 female thread
Voltage solenoid 12V 11W
Safety instructions and warnings
Safety instructions for BRC Europa 3 Toroidal external LPG tank 0° STD H.220mm
The BRC Europa 3 Toroidal external LPG tank 0° STD H.220mm is a safety-relevant product whose proper handling is of the utmost importance. The most important safety and operating instructions are summarised below:
- The product may only be installed, maintained or repaired by authorised specialists.
- Before installing the product, ensure that all applicable national and regional regulations are complied with.
- The operating instructions for the product must be read carefully and followed.
- The toroidal external tank may only be used in conjunction with a suitable gas regulator.
- Before refuelling the tank, ensure that all electrical devices in the vicinity of the tank are switched off.
- Refuelling may only be carried out in well-ventilated areas to prevent the accumulation of gases.
- Ensure that there are no sparks or naked flames in the vicinity of the tank during refuelling.
- After each refuelling, the completion of the refuelling process must be checked by means of a pressure drop test.
- In the event of an accident or damage to the tank, contact a specialist immediately.
- The product must be checked regularly for functionality and safety.
Manufacturer contact information
BRC GAS EQUIPMENT:
Westport Fuel Systems Italia S.r.l.
Via La Morra, 1
12062 - Cherasco (Cuneo) - ITALY
info.brc@wfsinc.com
