- Product description
- Accessories
The BRC Europa 3 multivalves are homologated according to European standard ECE 67R-01. It fulfils important technical and safety-relevant functions when operating vehicles on LPG.
The BRC Europa 3 LPG multivalve is the successor to the Europa 1 and Europa 2 multivalves, over 2 million of which have already been produced.
The Europa 3 version differs from the previous versions already in the production process, which has been improved by the use of new assembly lines that guarantee an optimisation of the work processes and make the component more reliable and easier to trace.
The Europa 3 multivalve meets the needs of installers and simplifies assembly work thanks to a new pipework configuration and a smaller and more compact solenoid valve group. The 80% fill stop has also been further improved and made more reliable.
The Europa 3 multivalves are available for both annular and cylindrical LPG tanks, in Standard and Max versions, the latter being designed for higher power engines.
Model type Standard 6mm
Compatible CylindricalLPG tank with 244mm diameter
Installation angle 30°
Inlet M12x1 male thread
Output M10x1 female thread
Voltage solenoid 12V 11W
Safety instructions and warnings
Safety instructions for BRC Europa 3 Cylindrical LPG tank 30° STD Ø 244mm:
1. store the cylinder tank in a well-ventilated place, away from sources of heat, naked flames and sources of ignition.
2. use only approved valves and fittings for the cylinder tank.
3. regularly check the condition of the multivalves and replace them if there are signs of damage or wear.
4 Ensure that the cylinder tank is securely positioned and cannot tip over.
5. avoid any kind of mechanical stress or impact on the cylinder tank.
6. keep the cylinder tank away from children and unauthorised persons.
7. observe all national and regional regulations for the safe handling of LPG tanks.
8. connect the cylinder tank properly to the corresponding supply system.
9. regularly check for gas leaks and take immediate action to rectify them if a leak is suspected.
10. only use suitable and approved accessories to connect the cylinder tank.
11 Observe the specified maximum fill levels and temperatures of the cylinder tank.
12. if problems or irregularities occur, contact the manufacturer or authorised specialists.
Manufacturer contact information
BRC GAS EQUIPMENT:
Westport Fuel Systems Italia S.r.l.
Via La Morra, 1
12062 - Cherasco (Cuneo) - ITALY
info.brc@wfsinc.com
