- Product description
- Accessories
The BRC Europa 3 multivalves are homologated according to European standard ECE 67R-01. It fulfils important technical and safety-relevant functions when operating vehicles on LPG.
The BRC Europa 3 LPG multivalve is the successor to the Europa 1 and Europa 2 multivalves, over 2 million of which have already been produced.
The Europa 3 version differs from the previous versions already in the production process, which has been improved by the use of new assembly lines that guarantee an optimisation of the work processes and make the component more reliable and easier to trace.
The Europa 3 multivalve meets the needs of installers and simplifies assembly work thanks to a new pipework configuration and a smaller and more compact solenoid valve group. The 80% fill stop has also been further improved and made more reliable.
The Europa 3 multivalves are available for both annular and cylindrical LPG tanks, in the Standard and Max versions, the latter being designed for higher power engines.
Model type MAX 8mm
Compatible CylindricalLPG tank with 244mm diameter
Installation angle 0°
Inlet M12x1 male thread
Output M12x1 female thread
Voltage solenoid 12V 11W
Safety instructions and warnings
Safety instructions for BRC Europa 3 Cylindrical LPG tank 0° MAX Ø 244mm
- The cylinder tank must be checked regularly for possible damage, corrosion and leaks.
- It is strictly forbidden to install or dismantle the cylinder tank without specialised knowledge and training.
- The cylinder tank must be installed in a well-ventilated area that should be kept away from children and unauthorised persons.
- It is important that the cylinder tank is not installed near sources of ignition or naked flames.
- When refuelling the cylinder tank, it is important that all other electrical devices in the vicinity are switched off.
- It is important that all connections and fittings of the cylinder tank are regularly checked for leaks.
- It is forbidden to fill the Cylindrical LPG tank with gases other than LPG.
- It is important that the cylinder tank is not damaged by dropping it or subjecting it to strong impacts.
- The cylinder tank must not be installed in closed rooms or vehicles.
- In the event of a fire, the gas supply to the cylinder tank must be shut off immediately and the area evacuated.
- It is important that only authorised specialists carry out maintenance work on the cylinder tank.
Manufacturer contact information
BRC GAS EQUIPMENT:
Westport Fuel Systems Italia S.r.l.
Via La Morra, 1
12062 - Cherasco (Cuneo) - ITALY
info.brc@wfsinc.com
