- Product description
- Accessories
The BRC Europa 3 multivalves are homologated in accordance with European standard ECE 67R-01. It fulfils important technical and safety-relevant functions when operating vehicles on LPG.
The BRC Europa 3 LPG multivalve is the successor to the Europa 1 and Europa 2 multivalves, over 2 million of which have already been produced.
The Europa 3 version differs from the previous versions already in the production process, which has been improved by the use of new assembly lines that guarantee an optimisation of the work processes and make the component more reliable and easier to trace.
The Europa 3 multivalve meets the needs of installers and simplifies assembly work thanks to a new pipework configuration and a smaller and more compact solenoid valve group. The 80% fill stop has also been further improved and made more reliable.
The Europa 3 multivalves are available for both annular and cylindrical LPG tanks, in Standard and Max versions, the latter being designed for higher power engines.
Model type Standard 6mm
Compatible CylindricalLPG tank with 244mm diameter
Installation angle 0°
Inlet M12x1 male thread
Output M10x1 female thread
Voltage solenoid 12V 11W
Safety instructions and warnings
Safety instructions for BRC Europa 3 Cylindrical LPG tank 0° STD Ø 244mm
- Installation, maintenance and repair of the multivalve may only be carried out by an authorised specialist.
- There must be no naked flames or smoking in the vicinity of the cylinder tank.
- When refuelling the cylinder tank, ensure that there is no electrostatic discharge to minimise the risk of explosion.
- There must be no damage or deformation to the multivalves or the cylinder tank. In the event of damage, the defective part must be repaired or replaced by an authorised specialist.
- Ensure that the multivalve and the cylinder tank are not exposed to high temperatures or stored in the sun. This can lead to overheating and increase the risk of an explosion.
- The gas line and the connection between the multivalves and the cylinder tank must not be damaged or leaking. If there is any damage, it must be repaired or replaced by an authorised specialist.
- Before carrying out maintenance work or replacing the multivalves, the cylinder tank must be completely emptied.
- No changes may be made to the multivalve or cylinder tank that have not been recommended or authorised by the manufacturer.
- If there is a smell of gas, leave the cylinder tank immediately and inform the fire brigade and the gas supplier.
Manufacturer contact information
BRC GAS EQUIPMENT:
Westport Fuel Systems Italia S.r.l.
Via La Morra, 1
12062 - Cherasco (Cuneo) - ITALY
info.brc@wfsinc.com
