LOCTITE® AA 326 yellow - general-purpose structural adhesive for fast cure
LOCTITE® AA 326 yellow - general-purpose structural adhesive for fast cure

LOCTITE® AA 326 yellow - general-purpose structural adhesive for fast cure

Article no.: 124267
Manufacturer: Loctite

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Features and benefits:

LOCTITE AA 326 is a universal construction adhesive for fast curing and high shear strength. The 2-step acrylate is used, among other things, for magnet bonding in electric motors.

It has good adhesion to various ferrites, a curing time of less than 3 minutes and a high shear strength of 15 N/mm². It can be used at temperatures up to +120°C. Requires LOCTITE SF 7649 for activation.

- High shear strength of 15 N/mm²
- Fast installation time within minutes (< 3 min)
- Developed for bonding with surface permanent magnets (SPM)
- Medium viscosity (thixotropic) supports easy automation and slack behaviour
- Temperature resistance up to +120°C
- Curing mechanism: activator or heat

Safety instructions and warnings

Safety Information for LOCTITE® AA 326 yellow - General purpose structural adhesive for fast curing

Hazard statements:

  • Causes serious eye irritation.
  • May cause an allergic skin reaction.
  • May cause respiratory irritation.
  • Harmful if vapour is inhaled.
  • May cause drowsiness and dizziness.
  • Toxic to aquatic life with long lasting effects.

Precautionary statements:

  • IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
  • IF ON SKIN: Wash with plenty of soap and water.
  • IF INHALED: Remove affected person to fresh air and keep comfortable for breathing.
  • IF SWALLOWED: Call a POISON CENTRE/doctor/... immediately.
  • In case of skin irritation or rash: Get medical advice/attention.
  • Dispose of contents/container properly.

Operating instructions:

  • LOCTITE® AA 326 yellow is suitable for experienced users only and should always be used in accordance with the manufacturer's instructions.
  • The surfaces to be bonded must be clean, dry and free of grease.
  • It is recommended that the product is stored at room temperature and protected from direct sunlight and frost.
Manufacturer contact information

Contact Manufacturer

Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf

https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.