LOCTITE® 454 - instant adhesive, transparent, universal, gel form, drip-free
LOCTITE® 454 - instant adhesive, transparent, universal, gel form, drip-free

LOCTITE® 454 - instant adhesive, transparent, universal, gel form, drip-free

Article no.: 124273
Manufacturer: Loctite

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Features and benefits:

LOCTITE 454 is an instant adhesive designed for bonding difficult-to-bond materials that require uniform stress distribution and high tensile and/or shear strength. The product enables rapid bonding of a wide range of materials including metals, plastics and elastomers. The gel consistency allows for overhead and vertical application.

LOCTITE 454 is also suitable for bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

- Universal instant adhesive gel
- Perfect for all quick repairs
- Ideal for overhead applications and vertical surfaces
- Bonds similar or dissimilar substrate combinations of wood, metals, ceramics and most plastics
- Non-sticky, particularly suitable for porous materials
- Does not drip or run

Safety instructions and warnings

Safety instructions for LOCTITE® 454 - Instant adhesive, transparent, universal, gel, non-drip

Hazard warnings:

  • Causes serious eye irritation.
  • May cause drowsiness and dizziness.
  • Toxic to aquatic organisms, with long lasting effects.
  • Pressurised container: May burst if heated.

Precautionary statements:

  • IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.
  • If you feel unwell, call a POISON CENTRE/doctor.
  • Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.
  • Dispose of contents / container in accordance with local / regional / national / international regulations.

Operating instructions:

  • Surfaces to be bonded must be clean, dry and free of grease.
  • Apply only a thin layer of adhesive to the surfaces to be bonded.
  • The parts to be bonded should be joined together and then pressed down firmly for at least 10 seconds.
  • The adhesive hardens completely within 24 hours.
  • To open the tube, unscrew the protective cap and pierce the seal at the tip of the tube with a sharp object.
Manufacturer contact information

Contact Manufacturer

Henkel AG & Co KGaA
Henkelstrasse 67
40589 Düsseldorf

https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.