LOCTITE® 222 purple - threadlocking adhesive, low strength
LOCTITE® 222 purple - threadlocking adhesive, low strength

LOCTITE® 222 purple - threadlocking adhesive, low strength

Article no.: 124249
Manufacturer: Loctite

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Features and benefits:

LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and grub screws. Well suited for low strength metals that could break during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant to low levels of contamination from industrial oils, e.g. engine oils, anti-corrosion oils and cutting fluids.

- Ideal for low-strength screw locking of set screws, countersunk screws and grub screws
- Prevents loosening on vibrating components, e.g. pumps, gearboxes or presses
- Particularly suitable for small thread sizes
- Enables disassembly with hand tools

Safety instructions and warnings

Safety instructions for LOCTITE® 222 violet - thread adhesive, low strength:

  1. Important General Safety Instructions:
    • Keep the adhesive out of the reach of children.
    • Wear gloves when using LOCTITE® 222 violet to avoid skin contact.
    • Do not inhale the adhesive and ensure that adequate ventilation is available.
    • Avoid contact with eyes. In case of contact with eyes, rinse thoroughly with water and seek medical advice.
  2. Storage and handling:
    • Store LOCTITE® 222 violet at room temperature.
    • Always keep the container tightly closed to prevent the adhesive from drying out.
    • Protect the adhesive from direct sunlight and heat.
    • Do not force open or heat the container.
  3. Application instructions:
    • Thoroughly clean and dry the surfaces to be bonded.
    • Apply the adhesive sparingly to avoid overdosing.
    • After application, allow the adhesive to cure before loading the thread.
    • Observe the recommended curing time and temperature.
  4. Disposal:
    • Dispose of the adhesive in accordance with local regulations.
    • Do not allow adhesive to enter drains or waterways.
Manufacturer Contact information

Contact Manufacturer

Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf

https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html

Subscribe to our newsletter
Our newsletter is free of charge and can be canceled at any time here or in your customer account.