- Product description
Properties and advantages:
Loctite 518 is a surface sealant that prevents the escape of liquids or gas under normal pressure. It forms an impermeable barrier. It provides a perfect seal between machined or rigid flange surfaces that have only minimal contact with each other - and thus also protects these metal parts from contact corrosion.
Loctite 518 hardens in the joint without air access. After curing, the seal is moderately strong and stable and has a long service life. It is suitable for both manual dispensing and screen printing. The advantage is that you can use Loctite 518 on flanges with a high temperature of up to 200 °C. Adapts to flange surfaces and gaskets up to 0.25 mm.
Technical Data
Technical data:
Size: 300 ml
Chemical base: Methacrylate
Colour: red
Operating temperature: -55 to 150°C
Fluorescent: Yes
Viscosity in mPa*s: 500000-1000000
Shear strength in N/mm: 7.5
Max. Joint in mm: 0.3
Handling strength behind, steel: 25 min.
Handling strength behind, aluminium: 20 min.
Strength: medium
Note: for machined, rigid metal flanges - semi-flexible
Safety instructions and warnings
Safety instructions for LOCTITE® 518 300ml, red - Medium strength, general purpose sealing product
1. read the manufacturer's safety data sheets and instructions before using the product
2. use the product only in accordance with the instructions and for the intended purpose.
3. wear suitable protective equipment, such as gloves and safety goggles, before use
4. keep the product out of the reach of children
5. avoid contact with skin and eyes. In case of contact, rinse thoroughly with soap and water.
6. work in well ventilated areas or use suitable respiratory protection.
7. protect the product from heat, sparks and open flames.
8. do not keep open containers or flames near the product.
9 Do not inhale or ingest the product.
10. if swallowed, seek medical advice immediately and show the label or packaging.
11. do not allow untrained personnel to handle the product.
12. observe local regulations when disposing of the product.
Manufacturer Contact information
Manufacturer Contact
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html