- Product description
Properties and advantages:
Loctite 518 is a surface sealant that prevents the escape of liquids or gas under normal pressure. It forms an impermeable barrier. It provides a perfect seal between machined or rigid flange surfaces that have minimal contact with each other - and thus also protects these metal parts from contact corrosion.
Loctite 518 hardens in the joint without allowing air to enter. After curing, the seal is moderately strong and stable and has a long service life. It is suitable for both manual dispensing and screen printing. The advantage is that you can use Loctite 518 on flanges with a high temperature of up to 200 °C. Adapts to flange surfaces and gaskets up to 0.25 mm.
Technical Data
Technical data:
Size: 50ml
Chemical base: Methacrylate
Colour: red
Operating temperature: -55 to 150°C
Fluorescent: Yes
Viscosity in mPa*s: 500000-1000000
Shear strength in N/mm: 7.5
Max. Joint in mm: 0.3
Handling strength behind, steel: 25 min.
Handling strength behind, aluminium: 20 min.
Strength: medium
Note: for machined, rigid metal flanges - semi-flexible
Safety instructions and warnings
Safety instructions for LOCTITE® 518 50ml, red - medium strength, universal sealing product
1. be sure to read and understand the manufacturer's instructions before use
2. use the product only according to the manufacturer's instructions.
3 Shake thoroughly before use.
4 Ensure that the surfaces to be bonded are clean, dry and free from oil, grease or other contaminants.
5. wear suitable protective equipment, such as gloves and safety goggles, during application.
6. keep the product away from children and pets.
7. ensure adequate ventilation during application.
8. protect the product from frost and direct sunlight.
9. do not inhale, swallow or allow to get into the eyes.
10. in case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
11. in case of contact with skin, wash the affected area thoroughly with soap and water.
12. if swallowed, seek medical advice immediately and show the packaging or the label.
13 Keep the product out of the reach of children.
14 The product may be harmful to health if used or stored incorrectly.
15 Dispose of the product in accordance with local regulations.
Manufacturer Contact information
Contact Manufacturer
Henkel AG & Co KGaA
Henkelstraße 67
40589 Düsseldorf
https://www.henkel-adhesives.com/de/de/%C3%BCber-uns/kontakt.html